Cable, Hood Release: Installation
- Install the hood latch release cable through the hole in the dash panel and seat the hood latch release cable grommet.
- Install the cable end (1) then engage the cable (3) into the hood release handle (4).
- Position the hood release handle on the steering column opening cover and slide it rearward until the retaining tab (2) snaps into place.
- Install the driver side instrument panel closeout. Refer to PANEL, SILENCER, INSTALLATION .
- Route the hood latch release cable and clip into place.
- Install the hood latch. Refer to LATCH, HOOD, INSTALLATION .
- Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION .
