Seal, Sunroof Glass: Installation
NOTE:
It will be necessary to cut the new seal to length, as it is a multi-fit seal. Careful not to cut short. The metal inner of the seal will not allow stretching.
- Align at seam point determined in removal. Refer to SEAL, SUNROOF GLASS, REMOVAL .
- Insert seal (2) bottom larger end (3) first and shift upward to set upper pointed edge (1).
- Repeat as necessary working around the sunroof glass.
- Once at starting point mark the seal where ends will meet.
- Using a pair of diagonal cutters or equivalent, cut through the seal.
- Finish seating of the seal.
- Install sunroof glass. Refer to SEAL, SUNROOF GLASS, INSTALLATION .