LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Front-SRT8

Rotor, Brake: Removal: Front-SRT8

NOTE:

Before proceeding, Refer to CAUTION  and WARNING .

NOTE:

Removal process is the same for both sides of the vehicle.

NOTE:

Six piston braking system shown in illustration, four piston braking system similar.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL .
    GC0170065Courtesy of CHRYSLER GROUP, LLC
  3. Remove the brake caliper to knuckle bolts (3).
  4. Remove the brake caliper assembly (4) from the knuckle and position aside.
    GC0170561Courtesy of CHRYSLER GROUP, LLC
  5. Remove any clips retaining brake rotor (1) to wheel studs.
  6. Slide brake rotor (1) off the hub (2).