LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Rear-Non SRT

Rear-Non SRT

NOTE:

Before proceeding, Refer to CAUTION  and WARNING .

NOTE:

Removal process is the same for both sides of the vehicle.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL .
    GC0170103Courtesy of CHRYSLER GROUP, LLC
  3. Remove the two brake caliper adapter to knuckle bolts (6).
  4. Remove the brake caliper (3) and adapter (1) as an assembly and position aside.
    GC0170481Courtesy of CHRYSLER GROUP, LLC
  5. Remove any clips retaining brake rotor (1) to wheel mounting studs.
  6. Slide brake rotor (1) off the hub (2).
scientia non olet · About LEMON Manuals