LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) >> Parking Brake >> Shoes, Parking Brake >> Removal

Shoes, Parking Brake: Removal

NOTE:

Removal process is the same for both sides of the vehicle.

NOTE:

Right side shown in illustration, left side similar.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove rear hub and bearing. Refer to HUB AND BEARING, REMOVAL .
    GC0170274Courtesy of CHRYSLER GROUP, LLC
  3. Completely back off parking brake shoe adjustment (1).
  4. Remove parking brake shoe adjuster spring (2).
  5. Remove shoe adjuster (1).
  6. Remove upper brake shoe hold-down clip and pin (3).
    GC0170345Courtesy of CHRYSLER GROUP, LLC
  7. Remove upper shoe (1) from return spring (3).
  8. Remove return spring (3) from lower shoe.
  9. Remove shoe actuator lever (2).
  10. Remove lower brake shoe hold-down clip and pin.
  11. Remove lower shoe.
  12. Inspect springs, adjuster, lever and aluminum shoe anchor pin for wear or damage. Replace as necessary.
scientia non olet · About LEMON Manuals