LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires & Wheels (Service Information) >> Wheels >> Stud, Wheel, Front >> Removal

Stud, Wheel, Front: Removal

NOTE:

Before proceeding, refer to CAUTION and WARNING .

CAUTION:

Wheel mounting studs MUST NOT be hammered out of hub flange of hub and bearing assembly. If a stud is removed by hammering it out, damage to hub and bearing assembly will occur leading to premature bearing failure.

GC0085488Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the front tire and wheel assembly. Refer to REMOVAL .
  3. Remove the front brake rotor. Refer to ROTOR, BRAKE, REMOVAL .
  4. Remove stud (2) from hub with Remover (special tool #C-4150A, Press, Ball Joint) (1).
scientia non olet · About LEMON Manuals