When Monitored

WARNING: This page is about a different variant/trim than selected.

This diagnostic runs continuously when the following conditions are met:

TCM supply voltage is greater than 7.0 volts.
Ignition switch Run position signal is detected via dedicated circuit to TCM.
Engine speed (CAN message) is greater than to 430 RPM.
No failure detected for P1DD2-00-TORQUE REQUEST SIGNAL FROM TCM DENIED.
No failure detected for U1424-00-IMPLAUSIBLE ENGINE TORQUE SIGNAL RECEIVED.
The elapsed time of the above conditions is greater than or equal to a calibrated value.