LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft >> Removal >> Removal, 5.7L

Removal, 5.7L

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0184008Courtesy of CHRYSLER GROUP, LLC
  2. Remove the 3 exhaust heat shield fasteners and remove the exhaust heat shield.
    GC0094956Courtesy of CHRYSLER GROUP, LLC
  3. Index mark the drive shaft to transfer case flange and the drive shaft to front axle flange.
  4. Remove and discard four front drive shaft to front axle flange bolts (2).
  5. Remove and discard four front drive shaft to transfer case flange bolts (2).
  6. Remove drive shaft assembly (1).
scientia non olet · About LEMON Manuals