3.6L Single Muffler
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Apply penetrating oil to band clamps.
- Loosen the catalytic converter to muffler/resonator clamps (1).
- Remove the eight nuts and both of the cross braces (2).
- Remove the front isolator bolt (1).
- Remove the rear isolator mounting bolt (1).
- Remove the right rear isolator mounting bolts (1, 2).
- Remove the left rear isolator mounting bolts (1, 2).
- With the help of an assistant, remove the muffler and tailpipe assembly by twisting/turning while pulling assembly out of catalytic converters.
