Hub And Bearing: Removal: AWD
NOTE:
Left side shown in illustration, right side similar.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the tire and wheel assembly. Refer to REMOVAL
.
- While a helper applies brakes to keep hub from rotating, remove hub nut (1) from the axle half shaft (2).
- Access and remove front brake rotor. Refer to ROTOR, BRAKE, REMOVAL
.
- Remove the four hub and bearing to knuckle bolts (2).
- Slide hub and bearing off axle half shaft and knuckle (1).
