LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning (Service Information) >> Plumbing >> Core, Heater >> Installation

Core, Heater: Installation

GC0144898Courtesy of CHRYSLER GROUP, LLC
  1. Carefully install the heater core (5) into the driver side of the HVAC air distribution housing (6).
  2. Install the heater core bracket (3) and retaining screw (4) and securely tighten.
  3. Remove the tape or plugs from the heater core tubes (1) and the heater core ports.
  4. Lubricate new O-ring seals with clean engine coolant and install them onto the heater core tubes. Use only the specified O-ring seals as they are made of a special material for the engine cooling system.
  5. Connect the heater core tubes to the heater core.
  6. Install the two clamps (2) that secure the heater core tubes to the heater core and tighten securely.
  7. Install the HVAC housing assembly. Refer to HOUSING, HVAC, INSTALLATION .
scientia non olet · About LEMON Manuals