Core, Service Port Valve: Removal

WARNING:

Review the warnings and cautions for this system before performing the procedure. Failure to follow these instructions may result in serious injury or death.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Typical A/C service port shown in the illustration.

Remove the protective cap (1) from the service port (2).
Recover the refrigerant from the refrigerant system. Refer to PLUMBING, STANDARD PROCEDURE .
Using a Schrader type valve core tool, remove the valve core (3) from the service port.
Install a plug in, or tape over the opened service port(s).