LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Removal >> 6.2L

Sensor, Camshaft Position: Removal: 6.2L

  1. Disconnect and isolate the negative battery cable.
    GC0170371Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the Camshaft Position (CMP) sensor wire harness connector (1).
  3. Remove the CMP sensor retaining bolt (3).
  4. Remove the CMP sensor (2) from the timing cover.
scientia non olet · About LEMON Manuals