LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Removal >> 5.7L/6.4L

Sensor, Camshaft Position: Removal: 5.7L/6.4L

  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine cover.
    GC0095240Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Camshaft Position (CMP) sensor wire harness connector (4).
    NOTE:

    Using a slight rotating motion, to carefully remove the CMP sensor from the timing cover (2).

  4. Remove bolt (3) and the CMP sensor (1).
scientia non olet · About LEMON Manuals