Injector(S), Fuel: Installation: 3.6L
- Lightly lubricate the new O-ring seals (1) with clean engine oil and position the seals onto the fuel injector (2).NOTE:
Number 2 fuel injector installation shown in the illustration, all other fuel injectors similar.
- Install the fuel injectors (1) into the fuel rail (2).
- Install the fuel rail and upper intake manifold. Refer to RAIL, FUEL, INSTALLATION .
- Position the air inlet hose assembly (5) onto the throttle body and the air cleaner housing.
- Secure the air inlet hose assembly retaining grommet onto the ball stud (4).
- Securely tighten the clamp at the air cleaner housing (3).
- Securely tighten the clamp (2) at the throttle body.
- Connect the Inlet Air Temperature (IAT) sensor wire harness connector (1).
- Install the engine cover (1).
- Connect the negative battery cable.
- Start the engine and check for leaks.
