LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Gas >> Throttle Body >> Removal >> 3.6L

Throttle Body: Removal: 3.6L

  1. Disconnect and isolate the negative battery cable.
    GC0144028Courtesy of CHRYSLER GROUP, LLC
  2. Remove the engine cover (1).
    GC0144029Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Inlet Air Temperature (IAT) sensor wire harness connector (1).
  4. Loosen the air inlet hose assembly clamp (2) and remove from throttle body.
  5. Loosen the air inlet hose assembly clamp (3) and lift the air inlet hose assembly (5) retaining grommet off the ball stud (4) and remove from air cleaner body.
    GC0144237Courtesy of CHRYSLER GROUP, LLC
  6. Detach the Electronic Throttle Control (ETC) wire harness clip from the housing (4) and disconnect the ETC wire harness connector (1).
  7. Remove bolts (3) and the ECT (2).
scientia non olet · About LEMON Manuals