LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Cylinder Head >> Diagnosis And Testing >> Diagnosis And Testing - Cylinder Head Gasket Failure >> Cylinder-To-Water Jacket Leakage Test >> Cooling System Tester Method

Cooling System Tester Method

CAUTION:

With the cooling system tester in place, pressure builds up fast. Excessive pressure built up by continuous engine operation must be released to a safe pressure point. Never permit pressure to exceed 138 Kpa (20 psi).

Install the commercially available Cooling System Tester to pressure cap neck. Start the engine and observe the tester's pressure gauge. If the gauge pulsates with every power stroke of a cylinder a combustion pressure leak is evident.

scientia non olet · About LEMON Manuals