Cover(S), Cylinder Head: Removal

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Remove the engine cover (2).
Remove the ignition coils. Refer to COIL, IGNITION, REMOVAL 5.7L/6.4L .

Fig 1: Cylinder Head Cover Removal Sequence
Courtesy of CHRYSLER GROUP, LLC
Using the sequence shown, remove the cylinder head cover bolts.
CAUTION:
Do not use harsh cleaners to clean the cylinder head covers. Severe damage to covers may occur.

Courtesy of CHRYSLER GROUP, LLC
Remove the cylinder head cover (1).
Clean the sealing surface of the cylinder head (2) and cover.

NOTE:

The cylinder head cover gasket may be used again, provided no cuts, tears, or deformation have occurred.