LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Block >> Crankshaft >> Removal

Engine Block: Crankshaft: Removal

GC0144934Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the vibration damper (1). Refer to DAMPER, VIBRATION, REMOVAL  .
    GC0081773Courtesy of CHRYSLER GROUP, LLC
  3. Remove the rear oil seal retainer. Refer to RETAINER, CRANKSHAFT REAR OIL SEAL, REMOVAL  .
  4. Remove the oil pan. Refer to PAN, OIL, REMOVAL  .
  5. Remove the oil pump pickup.
  6. Remove the windage tray/oil pan gasket.
    GC0081770Courtesy of CHRYSLER GROUP, LLC
  7. Remove the timing chain cover. Refer to COVER(S), ENGINE TIMING, REMOVAL  .
    GC0095573Courtesy of CHRYSLER GROUP, LLC
  8. Remove the oil pump. Refer to PUMP, ENGINE OIL, REMOVAL  .
    GC0095575Courtesy of CHRYSLER GROUP, LLC
    1 - Chain Tensioner
    2 - Camshaft Sprocket
    3 - Crankshaft Sprocket
  9. Remove the timing drive (2). Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL  .
    GC0092128Courtesy of CHRYSLER GROUP, LLC
    1 - MAIN BEARING CAPS
  10. Identify rod bearing caps before removal. Remove rod bearing caps with bearings.
  11. Identify main bearing caps (1) before removal.
    GC0081774Courtesy of CHRYSLER GROUP, LLC
    1 - MAIN CAP
  12. Remove main bearing caps (1) and bearings one at a time.
    GC0081775Courtesy of CHRYSLER GROUP, LLC
  13. Remove the thrust washers.
  14. Remove the crankshaft out of the block.
scientia non olet · About LEMON Manuals