LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Block >> Lifter(S), Hydraulic, Roller >> Removal

Lifter(S), Hydraulic, Roller: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the cylinder head. Refer to CYLINDER HEAD, REMOVAL  .
    GC0088064Courtesy of CHRYSLER GROUP, LLC
  3. Remove the tappet guide holder retaining bolt (1) from the tappet guide holder assembly (2).
    GC0088082Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    The lifter and retainer assembly must be installed as a unit.

    CAUTION:

    If the lifter and retainer assembly are to be reused, identify the lifters to ensure installation in their original location or engine damage could result.

  4. Remove the tappet guide holder (1) and tappets (2) as an assembly.
  5. Check the camshaft lobes for abnormal wear.
scientia non olet · About LEMON Manuals