LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Block >> Seal, Crankshaft Oil, Front >> Installation

Seal, Crankshaft Oil, Front: Installation

GC0144950Courtesy of CHRYSLER GROUP, LLC
CAUTION:

The front crankshaft seal must be installed dry. Do not apply lubricant to the sealing lip or the outer edge.

  1. Using the Crankshaft Front Oil Seal Installer (special tool #9072, Installer, Seal) (2) and (special tool #10387, Installer, Vibration Damper) (1), install crankshaft front seal.
    CAUTION:

    To prevent severe damage to the crankshaft or damper, thoroughly clean the damper bore and the crankshaft nose before installing damper.

  2. Install the vibration damper. Refer to DAMPER, VIBRATION, INSTALLATION  .
  3. Install radiator cooling fan. Refer to 5.7L SINGLE COOLING FAN, INSTALLATION or 5.7L DUAL COOLING FAN, INSTALLATION .
  4. Connect negative cable to battery.
scientia non olet · About LEMON Manuals