LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Block >> Solenoid, Multiple Displacement >> Installation

Solenoid, Multiple Displacement: Installation

  1. Verify the Multiple Displacement Solenoid (MDS) bores are free of debris before installing the MDS solenoid into the engine block.
    GC0174920Courtesy of CHRYSLER GROUP, LLC
  2. Install the MDS solenoid(s) (1), ensure the seal is fully seated into the engine block.
    GC0174922Courtesy of CHRYSLER GROUP, LLC
  3. Install the retaining bolt(s) (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
    GC0174917Courtesy of CHRYSLER GROUP, LLC
  4. Connect the MDS solenoid(s) (1) wire harness connector.
  5. Remove the cover from the engine intake ports.
scientia non olet · About LEMON Manuals