Solenoid, Variable Valve Timing (VVTS), Exhaust: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Lubricate the Variable Valve Timing Solenoid (VVTS) rubber O-ring seal with clean engine oil.
2. Install the VVTS and rotate into position.

   Courtesy of CHRYSLER GROUP, LLC

3. Install the VVTS (3) retaining bolt (2) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
4. Connect the VVTS wire harness connector (1).
5. Install the intake manifold. Refer to MANIFOLD, INTAKE, INSTALLATION  .