LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Front Half Shaft >> Boot, Drive Shaft, Inner >> Installation >> Crimp Type Boot Clamp

Crimp Type Boot Clamp

GC0094973Courtesy of CHRYSLER GROUP, LLC
  1. Clamp sealing boot onto tripod housing using Crimping tool (special tool #C-4975A, Installer, Axle Clamp) (3).
  2. Place Crimping tool (special tool #C-4975A, Installer, Axle Clamp) over bridge of clamp.
    GC0094974Courtesy of CHRYSLER GROUP, LLC
  3. Tighten nut on Crimping tool (special tool #C-4975A, Installer, Axle Clamp) (3) until jaws on tool are closed completely together, face to face (4).
scientia non olet · About LEMON Manuals