LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Axle >> Fluid >> Standard Procedure >> Standard Procedure - Fluid Fill

Standard Procedure - Fluid Fill

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0081451Courtesy of CHRYSLER GROUP, LLC
  2. Remove axle fill plug (1).
  3. Fill axle with 600ml (0.64 qts.) of Mopar® 75W-90 Synthetic Gear Lubricant. Fluid should be within 3/16" of bottom of fill hole.
  4. Install the axle fill plug and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals