LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Emissions Control >> Evaporative Emissions >> Solenoid, Evaporative Emissions Purge >> Installation >> 3.6L

Solenoid, Evaporative Emissions Purge: Installation: 3.6L

GC0144652Courtesy of CHRYSLER GROUP, LLC
NOTE:

The EVAP purge Solenoid (1) attaches to a bracket near the right rear of the engine. The solenoid will not operate unless it is installed correctly.

  1. Install the EVAP purge solenoid (1) onto the mounting bracket.
  2. Connect the vacuum lines (3, 5) to the EVAP purge solenoid.
  3. Connect the EVAP purge solenoid wire harness connector (2).
scientia non olet · About LEMON Manuals