LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System (Service Information) >> Cables, Battery >> Removal >> Positive - Engine Compartment

Positive - Engine Compartment

  1. Turn the ignition to the Off position. Be certain that all electrical accessories are turned off.
  2. Remove the spare tire cover to gain access to the battery.
    GC0170363Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect and isolate the battery negative cable (1) from the IBS.
  4. Raise vehicle on hoist. Refer to HOISTING, STANDARD PROCEDURE .
  5. Remove the right front wheelhouse splash shield to gain access to the battery positive cable bulkhead outside terminal.
    GC0080012Courtesy of CHRYSLER GROUP, LLC
  6. Remove the battery positive cable to bulkhead fastener.
    GC0080013Courtesy of CHRYSLER GROUP, LLC
  7. Remove the battery positive cable to starter fastener.
    GC0080014Courtesy of CHRYSLER GROUP, LLC
  8. On the 3.6L and 5.7L free the battery positive cable from the routing clips located at the back of the engine.
    GC0080015Courtesy of CHRYSLER GROUP, LLC
  9. On the 5.7L free the battery positive cable from the routing clip located at the back of the starter.
  10. Remove the battery positive cable from the vehicle making note of the cable routing.