LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Transmission >> BW44-40 Transfer Case (Service Information) >> Seal, Input Shaft >> Installation >> Rear

Seal, Input Shaft: Installation: Rear

GC0095898Courtesy of CHRYSLER GROUP, LLC
  1. Use (special tool #10174, Installer, Seal, Rear Output) Rear Output Seal Installer (1) to install the rear input shaft seal into the rear transfer case half (2).
    GC0095865Courtesy of CHRYSLER GROUP, LLC
  2. Install the rear output flange (1).
    GC0095864Courtesy of CHRYSLER GROUP, LLC
  3. Install the outer rear output shaft seal (1).
    GC0095863Courtesy of CHRYSLER GROUP, LLC
  4. Install the rear output flange washer (1).
  5. Install the rear output flange nut.
    GC0095862Courtesy of CHRYSLER GROUP, LLC
  6. Install (special tool #6958, Wrench, Spanner) Spanner Wrench (1) onto the rear output flange (2) and tighten the rear output flange nut to the proper torque specifications. Refer to TORQUE SPECIFICATIONS 
  7. Install the rear propeller shaft. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals