Link, Camber: Removal

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the tire and wheel assembly. Refer to REMOVAL .
For left hand side camber link service, remove the fuel filler tube. Refer to TUBE, FUEL TANK FILLER, REMOVAL .
Remove the rear exhaust. Refer to MUFFLER, EXHAUST, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Position a suitable jack (1) under the rear axle differential. Do not secure the jack to the stabilizer bar.

Courtesy of CHRYSLER GROUP, LLC
Position a suitable jack (1) to the crossmember on the repair-side of the vehicle.

Courtesy of CHRYSLER GROUP, LLC
Remove the front crossmember mounting bolt (1) on the repair-side of the vehicle.
- Remove the crossmember mounting bolts on the repair-side of the vehicle. Do NOT loosen or remove crossmember mounting bolts on the opposite side of vehicle. This will require a rear wheel alignment following reinstallation to ensure proper thrust angle.
Courtesy of CHRYSLER GROUP, LLC
Remove the rear crossmember mounting bolt (1) on the repair-side of the vehicle.
Carefully lower the crossmember.
NOTE:
Do not lower the repair-side of the crossmember any further than necessary to gain access to the link mounting bolts.

Courtesy of CHRYSLER GROUP, LLC
Remove the camber link bolts (1) and camber link (2).