Diagnostic Test

CHECK IF THE FORWARD FACING CAMERA IS INSTALLED PROPERLY 

1. Check if the Forward Facing Camera is installed properly. Refer to MODULE, FORWARD FACING CAMERA (FFCM), INSTALLATION .
2. With the scan tool, perform the Forward Facing Camera - Calibration Procedure. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .
3. Perform the FORWARD FACING CAMERA VERIFICATION TEST. Refer to STANDARD PROCEDURE .

   Does this DTC reset after performing the Forward Facing Camera Verification Test?

   Yes 

   • Check for any technical bulletins that may apply. If no other problems are found, replace and program the Forward Facing Camera Module (FFCM) in accordance with the Service Information. Refer to MODULE, FORWARD FACING CAMERA (FFCM), REMOVAL .
   • Perform the FORWARD FACING CAMERA VERIFICATION TEST. Refer to STANDARD PROCEDURE .

   No 

   • Test Complete.