LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (6.2L Engine (Service Information)) >> Manifolds >> Manifold, Exhaust >> Removal

Manifold, Exhaust: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE:

The left side shown. Right side similar.

  1. Disconnect and isolate the negative battery cable.
  2. Remove cylinder head. Refer to CYLINDER HEAD, REMOVAL  .
    Fig 1: Exhaust Manifold Bolts Removal/Tightening Sequence
    GC0170412Courtesy of CHRYSLER GROUP, LLC
  3. Remove the exhaust manifold bolts using the sequence shown, starting at eight and going backwards.
scientia non olet · About LEMON Manuals