Manifold, Exhaust: Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
Left side shown. Right side similar.
- Clean the sealing surfaces of the exhaust manifold and cylinder head.
- Using a new exhaust manifold gasket, position the exhaust manifold to the cylinder head.
- First install the NEW exhaust manifold retaining bolts finger tight.
- Using the sequence shown, tighten the retaining bolts to the proper specification. Refer to TORQUE SPECIFICATIONS .
- Install the cylinder head. Refer to CYLINDER HEAD, INSTALLATION .
- Connect the negative battery cable.
- Start the engine and check for leaks.
