Shock Absorber, Suspension: Removal: SRT

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the tire and wheel assembly. Refer to REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Position a suitable jack under spring link.

Courtesy of CHRYSLER GROUP, LLC
Disconnect the Active Damping System (ADS) shock connector (2) from the wire harness connector (3).

Courtesy of CHRYSLER GROUP, LLC
Remove the shock absorber (1) lower bolt (1).

Courtesy of CHRYSLER GROUP, LLC
Remove shock absorber upper bolts (1).
Lower the spring link and remove shock absorber.

Courtesy of CHRYSLER GROUP, LLC
Using special tool, (special tool #2027800020, Kit, Remover - Installer Shock / Strut) remove the shock absorber strut nut (4), and transfer parts: strut mount (1), dust shield (3), and jounce bumper (2).