LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Removal >> Rear Door Panel

Rear Door Panel

GC0144701Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the trim panel from the inside of the rear door. Refer to PANEL, REAR DOOR TRIM, POLICE, REMOVAL .
  3. Remove the two screws (1) that secure the speaker (2) to the inside of the rear door.
    NOTE:

    Support the speaker while disconnecting the wire harness connector. Do not let the speaker hang from the wire harness.

  4. Pull the speaker away from the door far enough to access and disconnect the wire harness connector from the speaker.
  5. Remove the speaker from the rear door.