Subwoofer - Shelf Panel
- Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
- Remove the trim from the package shelf panel. Refer to PANEL, REAR SHELF, REMOVAL .
- Remove the four (20.32 centimeter/8 inch diameter subwoofer) or six (25.4 centimeter/10 inch diameter subwoofer) screws (4) that secure the subwoofer (5) to the shelf panel support.
- Lift the subwoofer up from the shelf panel support far enough to access and disconnect the wire harness connector(s) (6) from the subwoofer.
- Remove the subwoofer from the shelf panel.