Switch, Park Assist: Description
The Park Assist OFF switch (2) is integral to the Integrated Center Stack (ICS) (1 and 3), which is located below the Radio Receiver Module (RRM).
The Park Assist OFF switch push button is clearly identified with a white International Control and Display Symbol graphic for Parking Aid and the text OFF . An amber Light Emitting Diode (LED) unit is illuminated behind a small clear plastic jewel-like lens in the push button to give a visual indication whenever the park assist system has been manually disabled or is unavailable due to a detected system fault while the status of the ignition switch is ON. The switch button also has panel lamps dimmer controlled illumination for night visibility.
All of the circuitry and components of the Park Assist OFF switch are contained within a molded black plastic ICS housing. The ICS is connected to the vehicle electrical system through dedicated take outs and connectors of the instrument panel wire harness.
The Park Assist OFF switch cannot be adjusted or repaired and, if the switch is ineffective or damaged, the entire ICS must be replaced with a new unit. Refer to MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL .