Horn System (Service Information): Horn: Description
Dual electromagnetic diaphragm-type horns are standard equipment on this vehicle. A low note (2) and a high note (1) trumpet-style horn are each secured to a dedicated mounting bracket. Each horn and mounting bracket unit is then secured by a single screw to the upper Front End Module (FEM) carrier. The mounting bracket fastening provision is concealed beneath an appearance shield. Internally the two horns are identical in construction and the external horn trumpets are symmetrically opposite.
The two male spade terminals (3) of each horn are connected to the vehicle electrical system through two dedicated take outs and connectors of the headlamp and dash wire harness.
The two horn and the mounting bracket units are each factory-tuned as a unit and; therefore, are serviced only as a unit. These horns cannot be adjusted or repaired. If either horn or mounting bracket is ineffective or damaged, that entire horn and mounting bracket unit must be replaced.