Cooler, Power Steering: Removal: SRT
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Siphon power steering fluid from pump reservoir.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL
.
- Loosen the hose clamp (1) and remove the cooler hose (5) from the cooler (2).
- Loosen the hose clamp (4) and remove the cooler hose (3) from the cooler (2).
- Push in on cooler mounting clip tabs.
- Remove cooler from clips mounted to cooling module.

