LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System >> Pump >> Hose, Power Steering, Return >> Removal >> Cooler To Reservoir - 6.2L

Cooler To Reservoir - 6.2L

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Siphon power steering fluid from pump reservoir.
  3. Remove the air cleaner. For 3.6L, refer to BODY, AIR CLEANER, REMOVAL . For 5.7L, refer to BODY, AIR CLEANER, REMOVAL . For 6.2L, refer to BODY, AIR CLEANER, REMOVAL . For 6.4L, refer to BODY, AIR CLEANER, REMOVAL .
    GC0170527Courtesy of CHRYSLER GROUP, LLC
  4. Loosen the hose clamp and remove the power steering return hose (1).
  5. Remove upper radiator closeout panels.
    GC0170514Courtesy of CHRYSLER GROUP, LLC
  6. Loosen the hose clamp (4) and remove power steering return hose (3) at cooling module (2).
  7. Remove return hose from routing clip on headlamp mounting crossmember.
  8. Remove the power steering return hose from the vehicle.
scientia non olet · About LEMON Manuals