LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Heating & Air Conditioning (Service Information) >> Distribution >> Housing, HVAC >> Installation >> Housing - Air Inlet

Housing - Air Inlet

GC0170593Courtesy of CHRYSLER GROUP, LLC
  1. Position the air inlet housing (3) onto the HVAC housing (8).
    CAUTION:

    Make sure that the recirculation-air door pivot shaft is properly seated in the pivot seats located on the top of the HVAC housing.

  2. Install the five screws (7 and 9) that secure the air inlet housing to the HVAC housing and tighten securely.
  3. Position the HVAC module and install the screws. Tighten the screws securely.
  4. Install the HVAC housing assembly. Refer to HOUSING, HVAC, INSTALLATION .
scientia non olet · About LEMON Manuals