Center Panel
NOTE:
Take the proper precautions to protect the face of instrument panel center bezel from cosmetic damage while performing this procedure.
- Position each air outlet (2) to the instrument panel center bezel (4).
- Engage the four retaining tabs (1 and 3) that secure each air outlet to the center bezel. Make sure the retaining tabs are fully engaged to the outlet.NOTE:
Make sure that the air outlets are properly aligned to the ducts within the instrument panel and that the foam seals on the outlets are properly installed.
- Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION
.
Connect the negative battery cable.
