LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Heating & Air Conditioning (Service Information) >> Distribution >> Motor, Blower >> Installation

Motor, Blower: Installation

GC0170581Courtesy of CHRYSLER GROUP, LLC
  1. Position the blower motor (2) into the HVAC housing (4).
  2. Install the three screws (3) that secure the blower motor to the HVAC housing and securely tighten the screws.
  3. Connect the wire harness connector (1) to the blower motor (2).
    GC0170245Courtesy of CHRYSLER GROUP, LLC
  4. Install the push fasteners, connect the wire harness connector and install the instrument panel closeout (3).
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals