Right Outboard Panel
NOTE:
Take the proper precautions to protect the instrument panel cover from damage while performing this procedure.
NOTE:
If the foam seal on the outlet is deformed or damaged, the seal must be replaced.
- Using a trim stick (2) release the trim ring (1) working around the perimeter. Once started, the trim ring can be grasped and pulled off.
- Locate the tabs (1) and pry inward with a small flat bladed tool (2) to release. Ensure the tabs hold the inward position.
- Grasp the front edge of the outlet (1) with pliers (2) and remove.
