Installation - 5.7L/6.4L
NOTE:
Right side shown in the illustration, left side similar.
NOTE:
The fuel injector O-rings may be used again, provided no cuts, tears, or deformation have occurred.
- Inspect the fuel injector O-rings (3) and replace if necessary.
- Apply a small amount of engine oil to each fuel injector O-rings.
- Install the fuel injector(s) into the fuel rail and install the retaining clip(s) (2).
- Install the fuel rail assembly (1). Refer to RAIL, FUEL, INSTALLATION .
- Start the engine and check for leaks.