LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Supercharger System >> Pump, Coolant, Charge Air Cooler >> Removal >> Removal Non 6.2L Ho

Removal Non 6.2L Ho

  1. Disconnect and isolate the negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
    GC0170484Courtesy of CHRYSLER GROUP, LLC
  4. Remove the auxiliary low temperature radiator shroud fasteners (1) and remove the shroud (2).
  5. Disconnect the coolant pump wire harness connector.
    GC0170071Courtesy of CHRYSLER GROUP, LLC
  6. Remove the two upper mounting nuts (1) securing the coolant pump to the mounting bracket.
  7. Release the clamp (2) and remove the coolant hose from the pipe.
    GC0170111Courtesy of CHRYSLER GROUP, LLC
  8. Release the clamp (2) and remove the coolant hose from the auxiliary low temperature radiator.
  9. Remove the two lower coolant pump mounting nuts (1).
  10. Remove the coolant pump from the vehicle.
  11. Remove the coolant hoses from the pump.
scientia non olet · About LEMON Manuals