LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Cooling System >> Engine >> Thermostat >> Installation >> 3.6L Coolant Crossover

3.6L Coolant Crossover

GC0144267Courtesy of CHRYSLER GROUP, LLC
  1. Clean gasket sealing surfaces.
  2. Install new gasket onto the coolant crossover.
    NOTE:

    The shorter M6 mounting bolts (2), bolt directly to the engine timing cover.

  3. Install the coolant crossover. Tighten bolts in a criss cross pattern to the proper torque specifications. Refer to 3.6L TORQUE SPECIFICATIONS .
  4. Install the heater supply hose to the coolant crossover (1).
  5. Install the thermostat housing. Refer to THERMOSTAT, INSTALLATION .
scientia non olet · About LEMON Manuals