LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Cooling System >> Engine >> Tube, Heater Hose, Supply >> Removal >> 6.2L

Tube, Heater Hose, Supply: Removal: 6.2L

  1. Disconnect and isolate the negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove the supercharger. Refer to SUPERCHARGER, REMOVAL .
  4. Remove heater hoses from heater tubes.
    GC0170070Courtesy of CHRYSLER GROUP, LLC
  5. Remove the bolt(s) (2) securing heater tube(s) (1) to the back of cylinder head.
  6. Remove the bolt securing the right side heater tube (1), from the timing cover.
  7. Remove the right side heater tube from water pump housing.
    GC0144611Courtesy of CHRYSLER GROUP, LLC
  8. Remove the bolt (1) and the left side heater tube (3) from water pump housing and remove the heater tube from vehicle.
scientia non olet · About LEMON Manuals