Installation Non 6.2L Ho

Courtesy of CHRYSLER GROUP, LLC

Install the coolant hoses onto the coolant pump.
Position the coolant pump onto the lower mounting bracket studs.
Install the two lower mounting nuts and tighten the nuts (1) to the proper torque specifications. Refer to 3.6L TORQUE SPECIFICATIONS or 5.7L/6.4L TORQUE SPECIFICATIONS .
Install the coolant hose onto the auxiliary low temperature radiator and secure the clamp (2).

Courtesy of CHRYSLER GROUP, LLC
Install the upper mounting nuts (1) and tighten to the proper torque specifications. Refer to 3.6L TORQUE SPECIFICATIONS or 5.7L/6.4L TORQUE SPECIFICATIONS .
Install the coolant hose onto the coolant tube and secure the clamp (2).

Courtesy of CHRYSLER GROUP, LLC
Position the auxiliary low temperature radiator shroud (2) to the vehicle and install the fasteners (1).
Connect the wire harness connector to the coolant pump.
Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION .
Connect the negative battery cable.
Evacuate air and refill cooling system. Refer to STANDARD PROCEDURE .
Check cooling system for leaks. Refer to DIAGNOSIS AND TESTING .