LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Cooling System >> Supercharger System >> Manifold, Coolant Crossover >> Removal

Manifold, Coolant Crossover: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove the cowl cover panel. Refer to COVER, COWL PANEL, REMOVAL .
    GC0170369Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the charger air cooler temperature sensor (2) wire harness connector (1).
    GC0170562Courtesy of CHRYSLER GROUP, LLC
  5. Remove the Low Temperature Radiator (LTR) circuit hoses from the coolant crossover (1).
    GC0170350Courtesy of CHRYSLER GROUP, LLC
  6. Remove the coolant crossover manifold mounting bolts (1).
  7. Remove the coolant crossover manifold from the vehicle.
scientia non olet · About LEMON Manuals