Manifold, Coolant Crossover: Installation
- Using a non-petroleum based lubricant, lubricate the
NEW
O-ring seals and O-ring pockets of the coolant crossover manifold.
- Install the coolant crossover manifold and tighten the bolts (1) to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the Low Temperature Radiator (LTR) circuit hoses (1) onto the coolant crossover tube.
- Connect the charger air cooler temperature sensor (2) wire harness connector (1).
- Install the cowl cover panel. Refer to COVER, COWL PANEL, INSTALLATION .
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Connect the negative battery cable.
- Start vehicle and check for cooling system leaks.
